Brady LiftMark Pipe Marker Carriers

Brady LiftMark Pipe Marker Carriers are a practical solution for pipe identification in environments where standard self-adhesive pipe markers may struggle. Designed to lift the marker away from the pipe surface, LiftMark creates a protective air gap that helps improve marker performance on hot pipes, wet pipes, insulated pipes, rough surfaces and washdown areas.

Where direct-applied pipe markers can be affected by heat, moisture, grease or regular cleaning, LiftMark Pipe Marker Carriers help keep identification clear, secure and compliant. This makes them ideal for industrial plants, process environments, utilities, food production facilities and other demanding sites where reliable pipe labelling matters.

  • Designed for harsh pipe marking environments including wet, greasy, dusty, rough and insulated pipe surfaces.
  • Creates a protective air gap between the marker and the pipe surface to help reduce the effects of heat and moisture.
  • Ideal for washdown areas where water needs to flow behind the carrier to support hygiene and cleaning.
  • Simple installation using standoffs and nylon ties, with the carrier snapping neatly into place.
  • Multiple carrier sizes available for 2" (50mm), 4" (100mm) and 8" (200mm) or larger pipe diameters.
  • Available with PVC or fibreglass carrier options with plastic standoffs.

[nerdy-form:16564]

Why Use LiftMark Pipe Marker Carriers?

  • Protect pipe identification – LiftMark helps extend the life of your pipe markers in applications where heat, moisture or contamination may affect standard adhesive labels.
  • Improved performance on difficult surfaces – Suitable for rough, insulated, wet, greasy and oily pipe surfaces where dependable identification is still required.
  • Supports hygiene and washdown requirements – The raised carrier design allows water to pass behind the marker rather than trapping it against the pipe.
  • Clearer long-term labelling – Helps maintain a professional and legible pipe marking system in demanding environments.
  • Easy to install – Nylon ties secure the standoffs to the pipe and the carrier then snaps into place.
  • Standards compliance – Helps support compliance with pipe identification requirements.

Typical Applications for Brady LiftMark Pipe Marker Carriers

  • Pipe identification on hot pipes where adhesive markers may fail prematurely.
  • Washdown environments in food, beverage and pharmaceutical facilities.
  • Wet or damp pipework in process plants, utilities and manufacturing sites.
  • Insulated pipes where reliable and visible pipe marking is still required.
  • Greasy, oily or dusty industrial environments where direct-applied labels may not be ideal.

Would you like to speak to a PipeMarking Expert? Call 01628 520440 or email experts@pipemarking.co.uk

LiftMark Pipe Marker Carrier Specification

Feature LiftMark Pipe Marker Carrier
Product Type Patented pipe marker carrier system that lifts the marker away from the pipe surface.
Description Use nylon ties to attach the standoffs to the pipe, then snap the carrier into place.
Marker / Carrier Material Plastic standoff with PVC or fibreglass carrier.
Installation Type Strapping / nylon ties
Pipe Diameter Range Three sizes supporting 2", 4" and 8" or larger pipe diameters.
Indoor Use Yes
Surface Abrasion Resistance Yes
Dirty / Dusty Surface Yes
Rough Surface Yes
Insulated Surface Yes
Wet Surface Yes
Greasy / Oily Surface Yes
Organic Solvents No – not recommended for MEK, acetone or toluene exposure.
Acid Resistance No – not recommended for sulfuric, hydrochloric or acetic acid exposure.
Alkali Resistance Yes – suitable for sodium hydroxide environments.
Alcohol Resistance Yes – suitable for methanol and isopropanol exposure.
Grease / Oil Resistance Yes
Minimum Installation Temperature 0°F (-18°C)
Service Temperature -40°F to 248°F (-40°C to 120°C)
Low PVC - Pipe Contact Point Yes
Low PVC - Whole Marker Yes
Low Halogen - Pipe Contact Point Yes
Low Halogen - Whole Marker Yes


[nerdy-form:16564]